|
| I have not seen that issue before but it seems like just about every year an isolated issue comes up with your combination of equipment.
It would appear that for some reason the implement thinks it has an offset programmed into one side of the receiver.
I think this could really screw up your shutoff distance if you plant the end rows with it thinking the end rows are off by 2 to 3 rows.
Looks like you’re running AgLeader stuff for your steering and GPS, I’m not that familiar with getting that signal into your 20/20.
This link goes back to issues from the year 2019.
https://www.newagtalk.com/forums/thread-view.asp?tid=850558&mid=7465...
And in that thread I have a link back to a post earlier that year.
Edit to add. Setting in my planter tractor. There is a way to enter in a nudge in a Gen 3 20/20 but I can’t see a reason to do it.
From your 20/20 Home Screen very top right corner > tap the mph icon > screen changes and on the right hand side there is a GPS Nudge and Corrections > tap that…..is everything showing 1’s or -1’s and then zero’s in the top left and right?
Edited by midwest 4/17/2025 04:50
| |
|
Gen 3 20/20 gps problem.
