|
| So i have a new to me Rogator 1300c with an Airmax R1 spreader. Theres a Viper 4+ running guidance and scripts and the RCM through UT which i actually have open on the Rogator's Vario terminal for ease of use/ less clutter on one display. Now my issue is I'm running scripts that have quite a bit of 0 application zones, but i can't get the sections to turn on until its entered the zone therefore not accounting for the ~2sec product delay. Yeah i know all about the accuboom and the on/off look ahead settings but it feels like these dont apply when following the prescription ie. going from a 0lb/ac zone to a 125lb. The accuboom does its thing properly when coming in and out of coverage areas where ive already spread like coming in and out of headlands. Coming out of headlands it'll turn on while still in coverage area but not when its off going into a zone within the prescription. is there separate settings i cant find? Accuboom has an option to use ISO look aheads which i assume are the RCM's settings but regardless one way or another the same thing. | |
|
Raven Viper 4+/RCM Rx look ahead settings
