|
| I’ve been having quite the time getting our Blue Vantage controller to receive any gps signal from the Nav on our MX280. I got an adapter from my dealer last fall when we upgraded tractors to access the Nav signal and thought we had everything squared away. Plugged everything in yesterday and no gps. Kinze has only recommended running straight from the 372 receiver, staying their system requires a raw signal for best performance. The problem is, my port B on the receiver is already being used for a digifarm receiver. So I have two questions:
First, is there something I am overlooking as far as getting signal from the Nav? I have NMEA output on, all messages selected at 10hz, and baud rate at 38400. 115200 is recommended by Kinze but not an option on my screen. Does anyone have experience with a similar issue where nothing shows up for signal?
Secondly, if I do go the recommended route, how can I access my port B if it is already in use? Is there a splitter I can use, or another way all around? I am fairly new to the precision side of things and don’t have much experience, so any guidance would be greatly appreciated. | |
|
Blue Vantage gps input
