AgTalk Home
AgTalk Home
Search Forums | Classifieds (116) | Skins | Language
You are logged in as a guest. ( logon | register )

Getting Started - Survey/Leveling Equipment Needed?
View previous thread :: View next thread
   Forums List -> Precision TalkMessage format
 
andya
Posted 1/31/2025 10:12 (#11082137 - in reply to #11081642)
Subject: RE: Getting Started - Survey/Leveling Equipment Needed?


NE Ark.
gpsdude - 1/30/2025 21:12

Have you tested the vertical accuracy over an extended timeframe of the CORS network? If not, do that first or plan for an in field base. Minimum of 24 hour log so you can plot the amount of elevation change. You may find after a couple hours, that no further logging is required as it moves too much.

GPS antenna receiver will have to be RTK unlocked. Minimum GPS and Glonass.

I have been around scrapers for quite a few years working with ditching, but I am not aware of what an auto-ejector is? Can you show an example?

If buying a used system, is there support available? If not beware. Be prepared to pay for support time.

Best of luck on your project.


Thanks for the advice. I haven't done any testing of the public data. Sounds like it is "not fit for purpose".

I'm probably not using the right term. When the dump location is reached the scraper pushes the dirt out. So I presume there are two things that need GPS control - the blade height and the ejection of the dirt.

Andy
Top of the page Bottom of the page


Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete cookies)