AgTalk Home
AgTalk Home
Search Forums | Classifieds (2) | Skins | Language
You are logged in as a guest. ( logon | register )

JD 9650 Cornerpost Display
View previous thread :: View next thread
   Forums List -> Machinery TalkMessage format
Posted 7/11/2024 05:05 (#10806150 - in reply to #10806102)
Subject: RE: JD 9650 Cornerpost Display

My guess is one of the 3 circuit boards for the corner post display. Not sure where there located but there is a ton of information on this exact same problem just have to search here on NAT

We had a similar issue but it was with the grain loss portion of the corner post display. Ended up being the tailings sensors. I disconnected them and things work as they should.

The can bus systems on these older machines can do wonky things and can affect something that has almost nothing to do with anything else if that makes sense. Good luck
Top of the page Bottom of the page

Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete cookies)