AgTalk Home
AgTalk Home
Search Forums | Classifieds | Skins | Language
You are logged in as a guest. ( logon | register )

NEMA string for JD 2600
View previous thread :: View next thread
   Forums List -> Precision TalkMessage format
 
John.Kenneth
Posted 7/9/2024 06:48 (#10803691 - in reply to #10803394)
Subject: RE: NEMA string for JD 2600


Ohio
The John Deere GS2 display does not accept NMEA data from a Trimble receiver or the NavController II because the GS2 display: • uses a GPS position with lower precision than is supplied by the lightbar or the NavController II. • does not accept an XP/HP or RTK position from an external receiver.
The GS2 display does not accept NMEA data from a stand-alone EZ-Guide 500 lightbar that uses OmniSTAR XP/HP or RTK as the correction source.

The solution is when setting up the NMEA output is to set a lower GGA Quality/ GGA output Decimal places.
If using CFX-750, EZ-Guide set the GGA output Decimal Places to 6 if using FMX set the GGA quality to 2.
Top of the page Bottom of the page


Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete cookies)