AgTalk Home
AgTalk Home
Search Forums | Classifieds (88) | Skins | Language
You are logged in as a guest. ( logon | register )

looking for steer valve maker
View previous thread :: View next thread
   Forums List -> Precision TalkMessage format
 
JHEnt
Posted 7/2/2024 20:02 (#10796331 - in reply to #10796324)
Subject: RE: looking for steer valve maker


Southern Illinois

Yeah we had to make up some steel lines for the return side to wrap from the added oil cooler back under the side frame stiffener plate to the pump return. I don't see any other pics saved from my phone camera. 

This valve had a inlet, power beyond, and a straight through return on both sides. 
So pump to inlet. Power Beyond to Steering orbit inlet. Steering orbit return into rear facing side of valve. Front facing Tank port to oil cooler and back to pump return.

The FR12-30 cartridge is preset to allow 4 gpm power beyond. It doesn't do anything here as the TW20 pump is about 4.5gpm max anyway.

Knowing this would add heat we added the oil cooler. It was a generic one off ebay that had flared ends.

I think the tractor is still parked in the shop building right now. I can look tomorrow.



Edited by JHEnt 7/2/2024 20:22




(diagram valve (full).jpg)



Attachments
----------------
Attachments diagram valve (full).jpg (52KB - 46 downloads)
Attachments steer valve 6way diagram - Copy.pdf (19KB - 59 downloads)
Attachments steer valve main section diagram - Copy.pdf (19KB - 57 downloads)
Top of the page Bottom of the page


Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete cookies)