AgTalk Home
AgTalk Home
Search Forums | Classifieds (90) | Skins | Language
You are logged in as a guest. ( logon | register )

Field doc connect Raven Dry controller to GS2630 having issues
View previous thread :: View next thread
   Forums List -> Precision TalkMessage format
 
ILSODGRWR
Posted 6/28/2024 12:48 (#10790814)
Subject: Field doc connect Raven Dry controller to GS2630 having issues


Kendall County, IL
I’m try to connect a Raven dry controller to a 2630 using a field doc cable for documentation purposes. This controller is not an option on the 2630 so I’m running it as a 440 which is an option. As a result, the 2630 is trying to use my speed cal of 615 as part of machine width in addition to actual spread width which is set in the console as 60’. Also, the 2630 is using the “valve 2 cal” of 53 as rate 1. If I set the Raven console to Rate 2 it will accurately display a correct rate in 2630. It’s as if the 2630 takes the info from Raven console but reads the data from one button to the right (layman’s terms).

I realize the communication is one way with this setup so everything on the Raven side will work fine and I can spread as is but I would like to get it set correctly for documentation. Can this be done or is this Raven console too much of an oddball? I know nothing about data strings but it seems like that is the part that needs to be changed/adjusted?

Edited by ILSODGRWR 6/28/2024 13:13




(IMG_1319 (full).jpeg)



(IMG_1320 (full).jpeg)



(IMG_1322 (full).jpeg)



Attachments
----------------
Attachments IMG_1319 (full).jpeg (124KB - 18 downloads)
Attachments IMG_1320 (full).jpeg (109KB - 17 downloads)
Attachments IMG_1322 (full).jpeg (84KB - 16 downloads)
Top of the page Bottom of the page


Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete cookies)