|
| Got the steering fixed with a calibration, still trying to get the aggressiveness/ smooth settings set, a lot of the times it doesn’t want to get closer then a foot to the line even with the aggressiveness turned all up.
Still have not figure out the controller problem, this a pwm, I was on the phone with ag leader and we tried all kinds of things in those settings and I don’t think changing the zero flow offset changed anything. I thought maybe the system just isn’t capable of doing the low 6 gal work, but I put it to 10 and slowed down to appropriate speed per the tee jet chart for 40 psi and it still sky rocketed the psi. | |
|
Ag leader liquid control module rate not working
