Posted 5/27/2023 17:17 (#10246018 - in reply to #10246012) Subject: RE: Agleader Integra virtual terminal problem
Had that exact same thing happen with a 1200 on a Deere tractor. Needed speed broadcast over the VT for an ISO downforce system but couldn't get it to work. I kinda figured the same thing you did, that something on the BUS was already broadcasting a 0 reading, but this even had a 3000 receiver on it and was still getting a speed reading of 0. Used a serial adapter to pull GPS out of the 3000 for the 1200. My fix was an ISO hijack cable since there was nothing ISO on the planter needed on the Deere display.