|
| Running a cfx750 with nav2 autopilot. I have a momentary remote switch attached to the nav 2 controller through pins 7 and 11 on the green plug.
It doesn't seem to work, i am wondering if it should work, or if my software versions don't support it?
The cfx750 is monitor version: 1.14, version: 1.00.048.4 [7.00]
Nav is 5.14
The monitor as I'm running says press the steering wheel picture or remote switch to engage. Autopilot does work, just not the switch.
Any suggestions? | |
|