|
SESD | I wanted to give you an update on the swath control also. If you remember earlier this spring I was trying to get the configuration set up. The way it ended up working with my original hagie toggle switches with the number 6 section toggle switch actually controlling section 1 and on down the line. In the actual sprayer setup when initially setting the machine up, I set the sections as if they were shut off from left to right. Then in the auxiliary input setup, I assigned it so switch one shut off section two, switch two shut off section three, and so on, with switch six shutting off section one. This is working properly this way. Originally, in the equipment set up, I set the sections up to match the toggle switches, and that was not correct. | |
|
Hagie STS12 and Agleader
