mkurkowski - 5/11/2023 05:23
Have a neighbor that I'd like to help finish planting. He runs jd rtk on striptill and planter. I have trimble rtk on planter. Will be planting on strips so sub inch is a must. If I put his guidance lines into SMS and then send them back out for trimble will I be on his strips?
SMS support says it will work. What does agtalk say?
It will “work” but results can be poor depending on field location and length. Trimble and Deere use a different heading direction definition so while your start point at be accurate it will rarely line up decent on a field the size of a 1/4 section.
I’m not sure why they all can’t be the same other than the thought that engineers are always thinking “my way is better”. |