|
northeast ohio | What antenna and accuracy level are you running with the field manager? This might influence if we recommend sticking with that antenna and running a display like a FMX via classic autopilot configuration vs jumping to a used GFX display.
As fingers said, you are most likely moving from the EZBoom to FieldIQ. To use your cabling from the EZBoom would require a “Raven replacement” harness 75503 or 88644 to a rate and section module. Cabling example attached. This configuration is used for CFX, FMX, TMX, and now GFX displays with just a minor cabling adjustment depending on which display. All use a master switchbox but only the CFX absolutely requires a 12 section. The EZBoom will sell ok as there are a number of EZGuide 500’s still operating.
If you look for used systems on AgTalk avoid any listings that are email only.
Edited by neo_ag 4/29/2023 07:07
(IMG_8785 (full).jpeg)
(IMG_8784 (full).jpeg)
Attachments ---------------- IMG_8785 (full).jpeg (130KB - 23 downloads) IMG_8784 (full).jpeg (115KB - 24 downloads)
| |
|