AgTalk Home
AgTalk Home
Search Forums | Classifieds | Skins | Language
You are logged in as a guest. ( logon | register )

Radiant heat tube at 45 degree angle
View previous thread :: View next thread
   Forums List -> Machinery TalkMessage format
 
jrmac
Posted 12/4/2022 12:12 (#9964663 - in reply to #9964168)
Subject: RE: Radiant heat tube at 45 degree angle


NWMO
Run 2 45 degrees on each side in a 60x60 shop and they don't run much if you just set them around 50* and leave them alone. Also was told the more stuff in shop or keeping it moderately full uses less as it heats all objects and the extra objects (machinery in our case) warm and help maintain temp...

Found out the hard way that trying to go too warm wastes a lot of extra fuel. And turning them down and up daily burns extra fuel. If you was not gonna use shop for several days then maybe adjust them down is ok.
Top of the page Bottom of the page


Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete cookies)