AgTalk Home
AgTalk Home
Search Forums | Classifieds (108) | Skins | Language
You are logged in as a guest. ( logon | register )

John Deere 4020 / Transmission Hydraulic Pump
View previous thread :: View next thread
   Forums List -> Machinery TalkMessage format
 
pirlbeck
Posted 12/1/2022 17:09 (#9960208 - in reply to #9960144)
Subject: RE: John Deere 4020 / Transmission Hydraulic Pump


West Central Iowa
MiradaAcres - 12/1/2022 16:29

Remove the two 1/2 bolts that hold the couplers to the rockshaft leaving the lines connected.

Pretty sure there is more than 2 bolts holding SCVs on and no lines going to SCVs since they are fed from rock shaft housing.



If the tractor is in fact a 1969 which would make it a side console, the SCV's are mounted on the rear of the rockshaft housing with 4 bolts and there are no lines running to the SCV's. No real reason the SCV's would need to be removed before lifting the rockshaft housing.
Top of the page Bottom of the page


Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete cookies)