|
| On the main wire ends, it has a male on the black wire and female on the white.
The Switch wire it has 2 female ends , that the toggle switch goes onto and the toggle is just on/off.
The snap disk has 2 male ends on it and the wire has 2 female ends.
So if the toggle switch is hooked up across that when it is on the power would run like it does before and when it is off the power will run through the disk and it will shut off under 130 degrees..
I wanted it so that when it se really cold out (at night) , I can turn the disk on so that it will shut the fan off and not blow the cold air into the fire box.
I know that the heat from the water will be going down , but at least it won't be having the cold air blowing in.
There's been times, that the fire has gone down and still blowing the cold air into it.
On the warmer days and nights, I don't need it and like to have it run the way it was made for. | |
|
Wiring a Outdoor Furnace Low Shutoff Switch
