Middlesex County, Ontario | sunman - 9/21/2022 09:59
A good hacksaw carefully following the seam works to cut them open (don't go too deep).
I broke the cable coming out of a laptop charger brick once and had to open the laptop charger brick in order to shorten and re-solder the cable. I turned to youtube for advice on how to open the charger brick without damage. The plastic halves are glued together and I didn't want to cut or break anything if I didn't have to.
Some indians on youtube taught me that gasoline, lightly applied to the cracks, loosens the glue that holds the plastic together. I've tried it on other electronic/plastic devices since then and it seems to work most of the time. I'm not sure if it would work to open the antenna, but its worth a try?
Here's a video: https://www.youtube.com/watch?v=Xle_MDy-qtU&ab_channel=FLUCKOLLIN
It takes a few minutes for the gasoline to wick in and soften the glue.
Edited by WildBuckwheat 9/21/2022 11:49
|
Ag Leader 6500 Issues
