|
| A momentary switch to D25 sub connector of T2 box pins 10 & 11.
Might be easiest and most economical to get an old type D25 printer cable and cut it and find out the right wires with a multi meter...
An EZ-Remote "stick" that connects to the CAN line (4-pin deutsch) is also most useful. I do like them (using Ez-Steer with EZ-Guide 500, CFX-750 & FMX displays).
Edited by Artic 8/2/2022 15:25
| |
|
Cfx 750 footswitch
