AgTalk Home
AgTalk Home
Search Forums | Classifieds (59) | Skins | Language
You are logged in as a guest. ( logon | register )

RAVEN 4600 / 5000 Which Pins Power it
View previous thread :: View next thread
   Forums List -> Precision TalkMessage format
 
tedbear
Posted 7/31/2022 17:05 (#9774421 - in reply to #9774141)
Subject: RE: RAVEN 4600 / 5000 Which Pins Power it


Southern Minnesota
I'm not guaranteeing this but Raven was very consistent in their pin assignments. Generally the smallest pin - Pin 1 is ground IN while the largest pin number is 12V IN. So on a Raven 440/450, Pin 1 is ground IN and Pin 16 is 12V IN. I forget how many pins the 4600 uses but I'm quite certain Pin 1 would be ground IN and the largest pin number would be 12V IN.

The 12V Power IN will generally go to a fuse first before going anywhere else. If there is a fuse, you could remove it and check for continuity to the connector pins one by one. I'm betting it will be connected to the largest numbered pin. If so replace the pin and power it up.

Edited by tedbear 7/31/2022 17:08
Top of the page Bottom of the page


Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete cookies)