|
Sanilac Co. Michigan | So, got ahold of Raven support. They said all i needed was USB to serial port adapter and some extension cable to hook the two together, along with some reprogramming info. Great.
Problem is, my 450 doesn't have a serial port to plug into, and the work around kit they had for that they no longer carry or support. Said get hold of AgExpress, maybe they have an old adapter. Well, nope, they don't. So, I'm at an impasse on getting the guidance to work with the controller.
So, I'm back to square one. I have located an orange/white wire in the bundle that plugs into the 15 pin connector on the back of the 450. Is that the wire that needs to work with the envisio +? If so what wire on the e+ does it go to, and how do you make those connections?
I've got an ez guide 250 on my old spray tractor that I could replace the e+ with, but I hate to give up on something until I know it's not possible.
Thanks for any help. | |
|
Connecting Envisio+ to Raven 450, the story continues.
