|
Butterfield, MN | I would think that one would be new enough where it should have a pressure transducer to sense the hydraulic pressure spike when you turn the steering wheel. If it does, there is a diagnistics screen in the steering section of the Envizio Pro that should display the live pressure reading, and it should spike up when the wheel is turned and drop way back down when it's not being turned. You can look at that and then adjust your disengage setting, which should be reading in PSI, to a pressure that's above the normal working pressure and below the spike pressure. If it's not giving you a reading at all, there could be a cable issue or a problem with the transducer itself. | |
|
Raven Envizio pro won’t engage
