|
Manitoba | I have a used rate and section control module and cabling along with field iq on an fm1000 with master switch. I am wanting to use it to do auto boom section control on our Hagie 2100. It currently uses a raven 460 with 5 section valves, raven Flowmeter and teejet valves. The fm 1000 and ez steer is doing the steering on rtk .
Any advice as to how to go about this? Go through the raven controller or abandon it completely. The raven system has never given me any problems I just would like to automate the section control vs doing it manually.
Any advice appreciated. Thanks
Martin
Edited by Oakwood 6/15/2022 14:55
| |
|