AgTalk Home
AgTalk Home
Search Forums | Classifieds | Skins | Language
You are logged in as a guest. ( logon | register )

FMX not seeing Autopilot Magnum
View previous thread :: View next thread
   Forums List -> Precision TalkMessage format
 
Trimbleguy
Posted 5/18/2022 21:55 (#9665940 - in reply to #9665651)
Subject: RE: FMX not seeing Autopilot Magnum


SEQ, Australia
Depending on how it was installed, the factory harness to the roof is made out of the worst wiring in the universe and the insulation cracks off in the sun after about a week. The hybrid wiring kit has a cable 67120 that conects to this and comes back into the cab, then connects to the 75741 cable which ends up at Port C on the back of the FMX. Double check you are definitely in Port C. Then follow those two cables and see if they are chewed/rubbed through or shorting out.
Top of the page Bottom of the page


Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete cookies)