|
NNW Nebraska | Put a valve like this on every Sprinkler on the overhang.
https://www.xcadusa.com/product-catalog/valves/control-valves/seal-m...
A electric valve (I think often called a skinner valve) supplied water pressure via ΒΌ" tubing to shut them off. Existing end gun most likely has one of those electric valves sending water pressure to a diaphragm operated 2" valve .
Could tee into the line after that electric valve to shut the over hang Sprinklers off. Ot if the pivot panel & span cables have provisions for a second end gun, a separate electric valve could be added. That would allow them to shut off the end gun before shutting off the over hang Sprinklers.
If your valley dealer can't or won't figure this out, talk to a different pivot dealer or direct pivot parts or nebraska irrigation.
Or Email me and I could give you the number of my zimmatic dealer that installed the same thing on a pivot I bought.
Edited by Nebraska Sandhiller 5/14/2022 23:39
| |
|
Neighbors watering our feedlot pens
