AgTalk Home
AgTalk Home
Search Forums | Classifieds (62) | Skins | Language
You are logged in as a guest. ( logon | register )

Looking for pin out of a cable with part number 380002422
View previous thread :: View next thread
   Forums List -> Precision TalkMessage format
 
Trimble Man
Posted 5/13/2022 09:01 (#9658826 - in reply to #9658745)
Subject: RE: Looking for pin out of a cable with part number 380002422


tedbear - 5/13/2022 23:03


The Tx and Rx can be confusing since it depends on which end you are thinking from.

The 2-2, 3-3 and 5-5 is very likely correct. Some situations need what historically is referred to as a Null Modem adapter. This is a throwback from the old Teletype days when one machine was connected directly to another without using a modem.



This pinout is correct. It is not a null modem cable, so doesn’t need or have the TX/RX crossed over. It is a communication/adapter cable. It has a 12pin DTM connector on one end, which isn’t even a std serial connector, so won’t likely be used for any other purpose than CNH Nav and Receiver service connection. It has an identical pinout to Trimble p/n 50166.
Top of the page Bottom of the page


Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete cookies)