|
NW IL | I'm still thinking there is an issue with the Y cable. Read through the article I referenced and followup with the tech that set up the Y cable.
If you have 372 im guessing that you have Port A with splitter to viper pro and capstan. You likely have Port C to Digifarm for Ratzk corrections. Port B in my experience is difficult to set up and use with 3rd party unless it is connected to trimble radio or trimble modem. Im guessing you are not using Port B of 372...but I could be wrong. | |
|
SmarTrax and Capstan Pinpoint problem.
