NW Central Iowa (Fort Dodge) | I am thinking by reading this you want to eliminate the 372? For now? So wanting to know how to export nema out of a Geosteer and pump it into the IV4. So the planting functions are all ran from Geosteer RTK and remove 372.
Need to get a nema out of port A or B on the geosteer . AGL makes a nema out cable for geosteer. Then connect in to the serial on Pro700
You need to change the GPS Communication Type to RS232B. It doesn't really matter which of the receiver models you choose; those are mostly just to autoconfigure the receiver for electric steering.
Then make sure the geosteer is sending out NMEA at 19200 - 38400baud, 5hz, or 10hz output rate, with at least GGA turned on. GSV is required as well if you want to use the Diagnostics > GPS2 screen. |