Near Intersection of I-35 & I-90 Southern Mn. | You say the previous owner used an Integra which is fine. Which module (PMM or STMM) did they use. Did the module you are trying to use come with the planter or did the previous owner keep it and you obtained one of your own. If possible I would check with the former owner as they may have some advice.
Many newer Kinze's would have come with the Muxbus system. When an Ag Leader is used for population on those, the module needed is the PMM. Other planters that do not use the Muxbus system would use the STMM (Seed Tube Monitoring Module). I have Deere planters which use the STTM. As I recall with the PMM and Muxbus, there is a setup procedure where a shaft speed sensor is involved as well as the connection for each row sensor. I believe the sensors need to start out unplugged and then get plugged in individually from left to right so the system learns the location of each sensor.
|
Incommand 1200 start up issues
