Have a 1200 Incommand,7500, and steady steer that I am trying to set up. The 7500 and 1200 Incommand seem to work fine but the module on the steering wheel will not turn on. The box that the steering wheel motor attaches to has two green lights so I know it is getting power to at least there. I updated the 1200 Incommand to the latest firmware. Could it be a bad steering wheel module? What else should I check?
I did try to upload the latest SCM file for the steercommand but it did not seem to upload. I assume it was because the module on the wheel would not turn on but maybe I am wrong.
Updated the 1200 Incommand software with the same USB stick and it worked just fine. Thanks everyone for help with that.