AgTalk Home
AgTalk Home
Search Forums | Classifieds (109) | Skins | Language
You are logged in as a guest. ( logon | register )

SF 6000 not showing up
View previous thread :: View next thread
   Forums List -> Precision TalkMessage format
Posted 12/30/2021 15:24 (#9407694 - in reply to #9407668)
Subject: RE: SF 6000 not showing up

Terril, IA
The starfire receiver is 1st on the can bus I believe so if a terminator is bad on the tractor the receiver wont load in the object pool.

First place I would check is the IBBC ISO coupler on the back of the tractor by the SCV remotes. There should be a 4 pin Deutsch connector on the bottom of that. Unplug it and clean it out real good with electrical contact cleaner.

Next place I'd check if the first one doesn't do the trick is behind the radio in the cab. There is another terminator there that has caused issues for me as well in the past.

Hope this helps.
Top of the page Bottom of the page

Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete cookies)