AgTalk Home
AgTalk Home
Search Forums | Classifieds (112) | Skins | Language
You are logged in as a guest. ( logon | register )

jd auto universal autotrac to ag leader pfpro
View previous thread :: View next thread
   Forums List -> Precision TalkMessage format
 
tedbear
Posted 11/29/2006 06:25 (#66885 - in reply to #66611)
Subject: RE: jd auto universal autotrac to ag leader pfpro


Near Intersection of I-35 & I-90 Southern Mn.
The Pf Pro and the PF Advantage both need a 9 Pin to 15 Pin adapter for this purpose. This adapter was included with the units when they were shipped. It is a short cable which may need an extension in between to reach your other harness.

If it has become lost, a replacement should be available from an Ag Leader dealer.

I have no experience with this combination of equipment. I can forsee a potential problem if the GPS out from the autotrac universal is not compatible with the Ag Leader. I would think that there is a good chance that it might be compatible since the 4800, 8, N, 1 is quite common. The Ag Leader needs the NEMA GGA and VTG messages to be ON. It is also desirable to have the other messages OFF. With other Deere situations, it has been possible to change the output via the Greenstar display to match the Ag Leader's needs.

Edited by tedbear 11/29/2006 06:26
Top of the page Bottom of the page


Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete cookies)