|
Mendota illinois | The safety switch is located on the right side of the transmission case near the top of the case, in front of the final drive, you will see a double wire plug-in. what you probably need to do is the arm the shifter arm the upper one loosen the clamp on that arm and take a hammer and tap on the arm what you’re gonna do is you’re gonna cause a shaft to work toward the right side of the tractor you may see the end of the shaft exposed, that will draw the cam closer to the switch that should fix the problem if not you can remove the switch there may be some washers on it, but you can takeoff, but be careful when you take a switch back up at hollow and can easily be twisted off.
Good luck , be careful
Rich | |
|