|
NE WI | Do these test like a potentiometer? It’s the one on the feeder house pivot on the right side. I measure 6k ohms across 1 and 3. 177 ohms across 1 and 2 and constant 6k ohms across 2 and 3 no matter how it’s turned.
In the diags menu this only changes from .8v to .9v up and down on the feeder house. It fails to calibrate with RC sensor error 124.
What’s throwing me for a loop here is the lateral tilt sensor which is the same PN acts the same way. This isn’t an encoder is it?
Obviously no spares and it’s a nice day out.
Edited by Jason_WI 10/17/2021 15:08
(D2829937-D2C6-47DB-A2C0-9B285B4FE009 (full).jpeg)
(C0459016-2333-4E4E-BF04-FE2AEB7B21D7 (full).jpeg)
(3F10AEBD-899B-449E-8757-81FDBF6CC02A (full).jpeg)
Attachments ---------------- D2829937-D2C6-47DB-A2C0-9B285B4FE009 (full).jpeg (109KB - 38 downloads) C0459016-2333-4E4E-BF04-FE2AEB7B21D7 (full).jpeg (108KB - 68 downloads) 3F10AEBD-899B-449E-8757-81FDBF6CC02A (full).jpeg (143KB - 55 downloads)
| |
|