|
| Tedbear, I found the problem. I have an Insight in my sprayer using the Raven cable that you talk about. I think that at the other end of the AgLeader cable that connects to the Raven cable goes to the Liquid control module, it goes to the upper left, (black) plug. on that cable is a jumper wire. That wire jumpers pin 12-10 to send the 12 v to the raven on/off valve. In my strip till unite I am not using the Raven cable, it is all AgLeader. I was told not to plug anything into that plug on the Liquid control module. WRONG I found that you need pin 12-10 jumpered.
Thanks for all of the time explaining.
Tradesman | |
|
Master Switch-InSight-Raven On/Off valve
