|
| I have a 1998 Patriot 150 with a setup of a raven 460 and Ez Guide 500 for spraying. I would like to use the Ez Guide 500 and Ez Boom 2010 for rate and section control bypassing the raven 460 entirely. My issue is that the ez boom won't control the sections of the boom. It won't turn them on or off and the master will not control the boom either. The ez boom is working as it shows up on the 500s screen. The sprayer has switches for each section and a master on the floor and these will turn the boom on and off. In another older post someone mentioned that the sprayer switches may be interfering with the switches on the ez boom. Does anyone have any ideas on how I could remedy this problem or has run into the same issue and fixed it somehow? Any help or advice would be appreciated. | |
|
Ez Boom 2010 not engaging sections
