|
| Hey Guys,
I am stuck here. Working on a Massey Discbine with a TopCon AGI-4 and AccuGuide 3000. It picks up satellites, and has a steerable signal, but for whatever reason does not have a heading, or detect movement. My latitude and longitude do not change as well. Basically, I have no inertial information.
I have tried the power on and off, unplug and re-plug. I've tested voltages and they are good. I've tried switching to different satellite source and back again to WAAS/Glonass.
I don't know what to do! Any help would be appreciated. | |
|