Posted 6/4/2021 05:31 (#9040949) Subject: Cruiser II box dead or switch bad?
We have Spray Coupe 4460 with 460 and Cruiser II. Ag Express had checked out the Cruiser II and updated software and it worked fairly good last season. (It had developed a problem previous of not allowing us to initiate or return to a field as far as painting sprayed areas of field, seemingly connected to abling/disabling the Accuboom feature). Now started spraying today and Cruiser II came to life perfectly on first attempt but on second field was totally blank after pushing on button on side of monitor. Then after several attempts of shutting down and restarting engine of Coupe, the Cruiser II came to life when pushing the on/off button and worked well for the whole tankful. The Accuboom node box had the same 2 steady green lights, 1 blinking green light showing whether the Cruiser II functioned or did not function. Wiggling the wiring/etc. didn't seem to be the fix. Please help with spots I might look at or procedures to try. I sure appreciate any helps and opinions!