|
| It SHOULD have a seat switch, it will be on the front corner of the seat mount. The seat sort of pivots forward on a sort of hinge, the switch should have been there when it was built at least. We had a 763C that had it. It is NOT in the seat like later models or other brands. The wiring and switch will be under the cab attached to the front of where the seat mount is.
Traction lock override was used for moving the machine with a backhoe installed so you could reach back into the cab from the backhoe seat and move the machine without having to get all the way into the cab and put the seat bar down, etc. | |
|