Posted 11/22/2024 20:21 (#10978857) Subject: 4440 Front axle bushing
Wyoming
Finally got around to getting the axle off to replace the bushing. I was pretty sure it was worn into the casting and I was right. Not sure best way to go about it now, possibly have the local machine shop come out and bore it out.
But also considering some cheaper fixes. Possibly just cutting a piece of metal and sticking it or welding it in there?
Also considering trying this titanium putty. Any advice? Got bushings but wasn't going to bother replacing the pins as they aren't that bad and I've heard they are very difficult to replace.
There's some pictures with the new bushing to show how worn it is. Thanks in advance
4440 Front axle bushing
