|
| CaseFarmer. We have turned under 3 outer dividers & one middle one. Turns out that the sensors on the Field Tracker were bad that caused the outer ones to catch. Middle one came off the rear hinges & folded under. According to SM they have had several sensors go bad early on. The hinge issue is one that is a problem on the 20" head. Saftey pin that is suppose to hold the divider from sliding off will work forward & the divider will slide past it. We have had dividers come off just driving across the ends & usally at least 1/2 are off one pin :~(. The 30" is held on by a bolt and supposedly there isn't a problem with them.
Edited by boog 11/20/2009 19:09
| |
|
2208 or 3208 corn head
