|
| Thinking lathe this spindle back 1/4 inch were the bushing rides against then outside shim it.this will make the track frame go inward and track will center.Any thoughts just wanted to see if would even lathe .
(DED769D6-288F-40C8-A62C-CE9F6D69BE17 (full).jpeg)
(FB15A964-DA29-4052-9B74-B07C2C516EB9 (full).jpeg)
Attachments ---------------- DED769D6-288F-40C8-A62C-CE9F6D69BE17 (full).jpeg (157KB - 24 downloads) FB15A964-DA29-4052-9B74-B07C2C516EB9 (full).jpeg (151KB - 35 downloads)
| |
|