|
S.E. Iowa | For what it is worth, I have made 2 tile plows. One three point and one pull type. I made the first one out of 1 1/4 plate and the 2nd one out of 1 q1 1/2 plate. Nothing special about it. I pulled the first one with a 3588 and had a 8100 Deere and a 9655 AGCO both fwa, along with a 4640 Deere all hooked to the 2+2. So I would say go to a welding shop and have them cut you out what you want. | |
|
Waterline plow for TD-20
