|
Faunsdale, AL | It will be a premix that will require something like 50 pounds per ton inclusion rate. Probably the best value will be to get it included in a mineral mix or a protein supplement that you will be adding anyway.
Only a registered feedmill operation can purchase the concentrate and they have to have the right equipment to measure and mix it so the whole batch is the same.
I doubt you will want to mix 100,000 pounds at once just to keep the feed fresh. With most on farm equipment a couple ton batch works out about right. We have some large TMR mixers (horizontal 4 auger) and used them to mix and deliver batches of grain up to 5 tons or so, but I would never consider adding anything that was less than 25-50 pounds inclusion rate and count on it getting evenly mixed. | |
|
mixing my own rumensin
