Extreme SW Minnesota Iowa border | Only two improvments I can offer. On the picture from the rear, I would put two triangle shaped piercing points, right were the I beams come to the back. They would stick all the way down below the cross I beams. I maid some stabilizers for a wrecker a few years back, and that's what we ended up doing for off road, frozen ground situations. The other is if you are going to run the cable up over the top with a snatch block , make sure your 3rd link is reinforced. I saw a three point blade that had been reversed and had a winch put on top of it, tear a hole in the tractor casting. And that was with a LOT smaller winch. |
3 point hitch winch- will this work?
