|
Tarzan, TX | +1 on the hose routing. Hose from tractor remote goes to middlebrow frame, tees and goes to out stroke port on center cylinder. In stroke port on center cylinder will go to out stroke port on wing cylinder. In stroke port on wing cylinder goes to tee in center and back to tractor. I have a 960 just like the one you are talking about. If all the plumbing is correct, there should be an eye bolt on each wing where the cylinders tie to the rock shaft on the gauge wheels. These can be adjusted to level the wings. | |
|
Phasing cylinders on a JD 960 field cultivator
