|
Eastern Nebraska | I'm not sure of the capabilities of the 2600, I imagine it will work, but I've done this with a 2630. I had a customer that wanted to disk the outside spread of this pivot, gun length included. So we got the lat/lon of the center points of the pivot, and set his track spacing to 40 feet using Circle Track. We then did the math and determined that the outside of the swath of the pivot was at track number 35 or so. He was then able to drive to that track number and engage AutoTrac. He was using RTK as well. | |
|
How to drive circumference of new pivot with GS2?
