AgTalk Home
AgTalk Home
Search Forums | Classifieds (3) | Skins | Language
You are logged in as a guest. ( logon | register )

pictures of the commodity shed-
View previous thread :: View next thread
   Forums List -> Stock TalkMessage format
 
garvo
Posted 11/20/2012 19:05 (#2707947 - in reply to #2707919)
Subject: Re: pictures of the commodity shed-


western iowa,by Denison
8ft tall walls-12inchs thick,rerod-uprights every 12inchs,horizontal at 12inchs,4000# strength,5ft footings,24 inchs wide,8-10 inch floor-rerod 2x2 squares, Wood-2x6 lumber number 1 or better-2x12-douglas fir-24Ft,drop in anchors lagged down with 3/4 grade 5 bolts-in the bracket that is also attached to every other 2x6 upright,3/4 plywood nailed every 8inchs,2x2-3/8 angle iron braces,all braces and joints on the roof bolted with 5/8 bolts and 1/2x2" flat washers-and wood knee bracing going in tomorrow-screwed with tourqscrews and nailed-(2x6 and bottom and top plates nailed with ring shank 40d)also-raingutter on back to direct water out of back cattle alley way- 66ft longx24ft deep -16ft clearance back wall -22ft tall front with 5ft drop tin to help keep some water out
Top of the page Bottom of the page


Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete cookies)