No Mans Land , Cimarron co. OK. | I have 4 flatbed fords and 2 will work normal and the other 2 you have to turn nozzel upside down to get it to fill proper. something to do with the angle and height of filler neck. Just put a PJ bed on my lastest f-250 and it works fine . I would bet it is most a venting problem than anything, auto-shutoff nozzels have to be turned upside down and gravity flow nozzels work ok. Been dealing with this issue for 35 years, I dont like to work out of a regular bed, prefer flatbeds. |