Bethany, MO | ProvidenceFarmer - 3/12/2012 23:13 and the pressure increased with speed up to 15 mph when it said solution flow was low.
Did it say solution flow was low at 15 mph?
I resorted to the 11.5 mph/32 psi combo for our 10 gpa. I guess I am just wondering if anyone out there has had any trouble with their high-flow 4830's rate controller and flow meter, and if anyone has any idea why it works some times and doesn't others. Any info or advice is appreciated.
I take it you're running red 04 tips on 20"? Did it count gallons while you were running on manual? Do you have the left valve on the rack from behind the machine, 1/2 or a little better open, the middle valve closed and the right valve open? Is high flow unchecked on the setup page? |
JD 4830 Flowmeter issues
